Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Roughneck 55692
Summary of Contents for Roughneck 55692
- Page 1 Auto Shut-off Fuel Nozzle with Digital Meter OWNER’S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item #55692...
-
Page 2: Technical Specifications
® product! For future reference, please complete the owner’s Thank you very much for choosing a Roughneck record below: Model: _______________ Purchase Date: _______________ Save the receipt, warranty, and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. -
Page 3: Specific Operation Warnings
2. Keep children away from work area. Do not allow children to handle this product. 3. Store idle equipment. When not in use, tools and equipment should be stored in a dry location to inhibit rust. Always lock up tools and equipment, and keep out of reach of children. 4. -
Page 4: Operational Buttons
The “LCD” of the meter features two numerical registers and various indications displayed to the users as below: Fig. 1 INDICATIONS Partial register (5 figures with moving comma from 0.1 to 99999) Indicate the volume dispensed since the reset button was last pressed. ... -
Page 5: Calibration Procedure
Next, the meter will reset the present total to 0.00. RESETTING THE RESETTABLE TOTAL (See Fig. 3) When the meter is on standby, press and hold the RESET key for 2 seconds to reset the resettable total. Fig. 3 DISPLAY CURRENT CORRECTION FACTOR AND GENERAL TOTAL (See Fig. - Page 6 Carefully follow the procedure indicated below. FORMULA Proper correction factor = current correction factor × (actual value/ display value) Example: Actual value 20.75 Display value 18.96 Current correction factor 1.000 Proper correction factor 1.000×(20.75/18.96)=1.000×1.094=1.094 Wait for the meter to go to standby. Reset the resettable total as outlined previously in Fig.
- Page 7 MODIFY THE CORRECTION FACTOR IN FIELD Carefully follow the procedure indicated below. Wait for the meter to go to standby. Reset the resettable total as previously outlined in Fig. 3. Start dispensing into a measuring glass. Stop dispensing when over 5 liters of volume is reached, then check the actual dispensed value.
-
Page 8: Troubleshooting
TROUBLESHOOTING Problem Possible Cause Corrective Action Bad battery contact or dead Check battery contacts or change LCD: no indication battery battery Refer to Calibration Procedure Meter set to wrong correction (Sections 1 and 2) to directly enter or factor modify the correction factor Imprecise measurement Increase the flow rate until an... -
Page 9: Warranty
Description Qty. Nozzle cover Screw Meter cover LCD Display Battery AAA Meter base Nozzle body Screw Spout For replacement parts and technical questions, please call 1-800-222-5381. WARRANTY One-Year Limited Warranty Page... - Page 10 Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.com Made in China Page...
Need help?
Do you have a question about the 55692 and is the answer not in the manual?
Questions and answers