Panasonic Toughbook CF-18BCAGCMM Supplementary Manual page 12

Installing the Software
4
<For CF-29L******/CF-29M****** series>
Input [x:
in [start] - [Run] and select [OK].
<For CF-29N******/CF-29P****** series>
Input [x:
in [start] - [Run] and select [OK].
* "x:" is the drive letter of the CD/DVD drive. Change this to match the drive letter on
1
your own computer.
5
Read "License Agreement" carefully, and select [Yes].
If you select [No], the utility will be aborted.
6
Input the destination folder, and select [OK].
Files will be extracted to the folder. (Default folder is "c:\upbiosec")
7
The message "Unpacking of files completed." will be
displayed, and select [OK].
8
Remove the CD-ROM.
9
Make a BIOS update floppy disk.
Remove the CD/DVD drive and insert the floppy disk drive into the
1
Multimedia Pocket. (
Insert a new 2HD floppy disk in the floppy disk drive.
2
Format the floppy disk using the following procedure. (Be sure to make it
3
bootable.)
Select [start] - [My Computer], right-click on [3 1/2 Floppy (A:)] and select
[Format].
↓
Add a check mark for [Create an MS-DOS startup disk], and select [Start].
↓
Follow the on-screen instructions.
Show hidden files on a floppy disk using the following procedure.
4
Double-click [3 1/2 Floppy (A:)] and select [tool] - [Folder Options] - [View].
↓
Add a check mark for [Show hidden files and folders] in [Hidden files and folders].
↓
12
*1
\29LM\bios_29_4_r060067a_ec_29_4_m060043.exe]
*1
\29NP\bios_29_5_r060068a_ec_29_4_m060043.exe]
"Multimedia Pocket")