Panasonic Toughbook CF-18BCAGCMM Supplementary Manual page 16

Installing the Software
Installing the Software
1
<For CF-18 series>
Connect the CD/DVD drive to the USB port.
<For CF-29 series>
Insert the CD/DVD drive into the Multimedia Pocket. (
"Multimedia Pocket")
2
Turn on or restart the computer, and run the Setup Utility by
pressing F2 while [Panasonic] screen is displayed.
If [Enter Password] is displayed, input the Supervisor Password.
3
Select the [Advanced] menu and confirm the following.
[On & Off] is selected at [Power SYNC with PC].
If [On & Off] is not set, confirm the power to the HSDPA/UMTS modem is on.
4
Save the settings and exit the Setup Utility.
5
Log on to Windows with the administrator authority.
6
Turn off the HSDPA/UMTS modem.
7
Set the Wireless WAN (HSDPA/UMTS) Software CD-ROM into
the CD/DVD drive.
8
Input [x:
* "x:" is the drive letter of the CD/DVD drive. Change this to match the drive letter on
1
your own computer.
9
Follow the on-screen instructions, and install the software.
10
When the installation completes, turn on the HSDPA/UMTS modem.
Wait until the HSDPA/UMTS modem is recognized.
11
Remove the CD-ROM.
16
*1
\setup.bat] in [start] - [Run] and select [OK].