TOOLS REQUIRED
Safety goggles
Installation
1
INSTALLING THE VANITY TOP
IMPORTANT: Do not use plumber's putty.
NOTE: Before installation, make sure all parts are present. If any
part is missing or damaged, do not attempt to install the product.
NOTE: The faucet, drain, and supply lines are not included. Install these
parts to the vanity top according to the manufacturer's instructions.
□ Apply silicone caulk/sealant (not included) to all four corners of
the cabinet (not included).
□ Place the vanity top onto the cabinet.
□ Position the top so that it has an equal amount of overhang on
each side and use a level to ensure the vanity top surface is level.
□ Apply silicone onto the seam between the edge of the vanity top
and the wall, smooth the bead, and allow to cure before use.
Safety Information
Please read and understand this entire manual before attempting to assemble, operate or install the product.
Care and Cleaning
□ Use a mild liquid soap and a soft cloth to clean your vanity top. Avoid using any harsh, abrasive cleaners or mineral spirits.
Measuring tape
Item #1001 784 466, 1001 784 486
Item #1001 784 476, 1001 784 487
Item #1001 784 482, 1001 784 536
Model #2231SQ-SUG3, 2231SQ-SLV3
Model #2237SQ-SUG3, 2237SQ-SLV3
Model #2249SQ-SUG3, 2249SQ-SLV3
Use and Care Guide
Caulk/sealant
Vanity Top
Level
HOMEDEPOT.COM
Please contact 1-888-774-8062 for further assistance.
Need help?
Do you have a question about the 2231SQ-SUG3 and is the answer not in the manual?
Questions and answers