Removing And Installing Lower Plate - Panasonic MC-V5268 Operating Instructions Manual

WARNING
Disconnect the electrical supply before servicing or cleaning the unit.
Failure to do so could result in electrical shock or personal injury from
cleaner suddenly starting.

Removing and Installing Lower Plate

Latches
Lengüetas
Loquets
Rear Belt
Cover
Cubierta de
la correa
trasera
Couvercle de
la courroie
Lower Plate
Base inferior
Plaque inférieure
Electrical Shock or Personal Injury Hazard
- 26 -
➢ ➢ Before servicing any parts, disconnect
vacuum from electrical outlet.
➢ ➢ Place paper under nozzle whenever
lower plate is removed to protect floor.
➢ ➢ Place handle in upright position and
turn vacuum over to expose lower plate.
➢ ➢ Release lower plate by pressing two
(2) latches inward.
➢ ➢ Remove lower plate and remove any
residue that may exist in belt area.
➢ ➢ Close the rear belt cover and reinstall
lower plate by hooking front end of
lower plate into slots on front of
nozzle housing.
➢ ➢ Make sure all wires are routed
properly and not pinched.
➢ ➢ Press lower plate into place then
push two (2) latches outward.