Functional Description; Speed Change - Makita 6904VH Instruction Manual

FUNCTIONAL
DESCRIPTION
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function
on the tool.
Switch action
1
► 1. Switch trigger
CAUTION:
• Before plugging in the tool, always check to see
that the switch trigger actuates properly and
returns to the "OFF" position when released.
For 6904VH
To start the tool, simply pull the switch trigger. Tool
speed is increased by increasing pressure on the switch
trigger. Release the switch trigger to stop.
For 6905H
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
Reversing switch action
► 1. Reversing switch
For 6904VH
This tool has a reversing switch to change the rotational
direction. Press the upper side (FWD side) for clock-
wise (forward) rotation or the lower side (REV side) for
counterclockwise (reverse) rotation.
For 6905H
This tool has a reversing switch to change the rotational direc-
tion. Press the right side of the switch for clockwise (forward)
rotation or the left side for counterclockwise (reverse) rotation.
► 1. Reversing switch
CAUTION:
•
•

Speed change

1
► 1. Speed change lever
For 6904VH only
To change the speed, first switch off the tool and then
slide the speed change lever fully to the "H" side (lower
side) for high speed or to the "L" side (upper side) for
low speed. Before starting operation, ensure that the
speed change lever is slid fully to the desired side.
Select the speed optimum for your job.
CAUTION:
•
5 ENGLISH
1
Always check the direction of rotation before operation.
Use the reversing switch only after the tool comes to
a complete stop. Changing the direction of rotation
before the tool stops may damage the tool.
Do not use the speed change lever while the
tool is running. The tool may be damaged.
1