Table of Contents
Advertisement
5. Remove the drive arm concave phase from the tray slider and tray.
<Assembling the tray unit>
1. Insert a part of the tray into the unit sliding over the groove on the
mechanical chassis unit.
2. Insert the tray to the point before the tab of the mechanical
chassis unit.
3. Hook the drive arm concave phase over the tray and the tray
slider.
4. Press in the tray.
5. Make sure that the tray and the drive arm move smoothly.
PDF created with pdfFactory Pro trial version
22
www.pdffactory.com
Advertisement
Table of Contents
