Names Of Parts - Daikin FTXM20W2VMA Operation Manual

Read Before Operation

Names of Parts

Indoor Unit
Flaps (horizontal blades)
Louvres (vertical blades)
• The louvres are inside of the air outlet.
Page 16
Display
MOLD PROOF lamp (Green)
Page 17
TIMER lamp (Orange)
Page 25,26,27,30,32
Indoor unit ON/OFF switch and
OPERATION lamp (Green)
• Press this switch once to start operation.
Press once again to stop it.
• For the operation mode setting,
refer to the following table.
Model
FTXM20/25/35/46
FTKM20/25/35/46
• This switch can be used when the remote controller
is missing or out of batteries.
List of lamps
Lamp
OPERATION lamp
TIMER lamp
MOLD PROOF lamp
STREAMER lamp
Wireless LAN
connecting adapter lamp
5
Front panel
Air outlet
Page 16
Mode Temperature setting
AUTO 25.0°C
COOL 22.0°C
Colour State
Lights up
green
Blinks
orange Lights up
green Lights up
green Lights up
Lights up
orange
Blinks
Air inlet
Model name
Airflow rate
AUTO
AUTO
Description
The air conditioner is running.
Check the error code.
TIMER is set.
Page 25,26,27,30,32
MOLD PROOF operation.
Page 17
STREAMER operation.
Page 19
Wireless LAN connecting adapter operation.
Wireless LAN connecting adapter is connected.
„ Room temperature
sensor and Room
humidity sensor
• Sense air temperature
and humidity around
the unit.
„ Streamer air inlet
• Air inlet for streamer
operation.
INTELLIGENT EYE
sensor
• Detects the movements of people
and automatically switches
between normal operation and
energy saving operation.
Page 21,22
STREAMER lamp (Green)
Page 19
Wireless LAN connecting adapter
lamp (Orange)
Page 34
Signal receiver
• It receives signals from
the remote controller.
• When the unit receives a signal,
you will hear a beep sound.
Case Sound type
Operation start beep-beep
Setting change beep
Operation stop long beep
Page 34
Page 34