Calypso Instruments Ultrasonic Portable Solar User Manual page 12

*Please check our available accesories on our website.
Make sure to install the sensor in a location free from anything that obstructs the flow of
wind to the sensors within a 2 meter radius, for example, the mast head on a boat.
5.2. Installing the App and testing the unit
Follow the next steps:
1. Make sure your device is BLE compatible*.
· Ultrasonic Portable Solar works with Android 4.3 or 4.4 or iOS devices (4s, iPad2 or
beyond).
2. Download and install Anemotracker App on your device from Google Play or Apple
Store.
3. Once the App is installed, start it and open the settings menu by sliding the screen to the
right.
4. Press the button "Scan" and all Ultrasonic Portable devices within the range should
show up at screen.
5. Select your device and connect.
If your device connects with the Ultrasonic Portable correctly, continue with the normal
installation.
If not, please read the following lines.
Your device is compatible but you can not connect?
1. Make sure BT (Bluetooth) mode is running on your smartphone, Tablet or PC.
2. Make sure Ultrasonic Portable Solar is not on Off mode. If the device has not been
exposed to any source of light for an extended period of time it might be necessary to
keep it under direct sunlight for a few hours. A cloudy day will work too.
4. Make sure no other device is linked to your Ultrasonic Portable Solar.
Each unit can only be connected to a single device at a time. As soon as it gets disconnec-
ted, Ultrasonic Portable is ready to link to any other device with the Anemotracker app
installed.
For further information please contact Calypso Technical Support at
aftersales@calypsoinstruments.com.
Ultrasonic Portable Solar
User manual
11