Legal Notices; Declaration Of Conformity With European Directives - Origin Instruments Sip/Puff Switch User Manual

Sip/Puff Switch User Guide

Legal Notices

Information in this User Guide is provided "as is" by Origin
Instruments, is subject to change without notice, does not
represent a commitment on the part of Origin Instruments, and is
provided without warranty of any kind, either expressed or implied,
including any implied warranties of merchantability or fitness for a
particular purpose. No part of this document may be reproduced
or transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording or information
storage and retrieval systems, for any purpose other than the
purchaser's personal use, without the express written permission
of Origin Instruments.
Declaration of Conformity with European
Directives
RoHS
The Sip/Puff Switch contains two passive, normally open, pressure
switches. Their contacts are brought out on two 1/8-inch (3.5mm)
connectors. The switches are designed for low voltage and low
current signal loads. They are not designed or rated for switching
power loads. The switches are rated for switching voltages at or
below 30-Volts AC/DC, and currents at or below 0.030-Amps.
The Sip/Puff Switch is a Low Voltage Device as defined in the
Directive 2006/95/EC of 27 December 2006. It meets the criteria
of Article 1 of 2006/95/EC of 27 December 2006 as a Safety Extra
Low Voltage (SELV) device. The Sip/Puff Switch does not contain
active electronics and Electromagnetic Compatibility (EMC) testing
for Radio-electrical interference is not required.
Origin Instruments Corporation Page - 3