Feed Flow Adjustments
Guidelines for Use
Three feeding adjustments are possible:
1.
Voltage adjustment for adjusting the strength of the vibration.
2.
Run time for adjusting the duration of feeding.
3.
Bottom plate opening to adjust the flow of the feed.
4.
Set voltage on
SF51 or SF62 to set vibration intensity. Set run time or duration on the SF41 timer.
a. Loosen the adjusting screws and set the bottom of the plate gap so that it is
evenly spaced at all three adjustments.
b. Make sure the hardware is tight so adjustments will stay set during extended
periods of operation.
2395 Apopka Blvd.
•
Apopka, FL 32703
•
Phone: 877-347-4788
a
b
Plugs into the SF51, which
delivers a variable DC voltage
of 3 to 12 volts.
•
Fax: 407-886-6787
•
PAES.General@Pentair.com
•
PentairAES.com