Advertisement
c) Connect the machine with the contact point of the power supply.
machine is now ready to use.
d) Push the switch on the machine to start working.
e) The machine stops picking up liquids when the drum is full.
immediately the machine and empty the drum.
CLEANING AND MAINTENANCE
-
Never store the machine without cleaning it.
lifetime and hygiene of the machine.
-
Always unplug the machine from his contact point before doing any cleaning
or maintenance on the machine.
-
Empty the drum and clean the drum with fresh water. Dry the drum with a
cloth.
-
On the 60lt models an exhaust hose is forseen to empty the drum. Pull out
the exhaust plug and let flow the water.
-
Rince the exhaust hose with fresh water and let it leak out for a while. D'ont
forget to replace the plug on the exhaust
hose after the hose has been cleaned.
-
Clean from time to time also all the used tools.
-
If using the machine to pick up dust it is necessary to clean the cotton filter.
Do this using a small brush or with
compressed air. Replace the cotton filter if needed. Replace, if needed the
paper bag. A used paper bag can not be reused.
-
Use always if picking up fine dust, an extra nylon filter or a paper bag.
-
Always check, before using the machine, the main cable on eventually
damage.
-
The motors in this machine are maintenance free. Only check once a year
the carbon brushes and replace them if necessary.
The replacement of the carbon brushes has to be done by an service
engineer.
POSSIBLE CLAUSES OF TROUBLES
Coton filterbag coated with dirt ----- Clean or replace the filter
Disposable paper bag filter or drum is full ---- Replace the paper bag or empty
and clean the drum
Suction hose, wand or tools are blocked ------------------- Clean
For all models fine dust filters (nylon) are available. Ask for more details at your
FLOORPUL dealer-center.
Tools:
Option
This will contribute to the
The
Stop
Advertisement
