Tests: Service Tests
2.2.13 Antenna RX Diversity
N/A.
Do not use this test!
2.2.14 Bluetooth
During this test, the distance between the phone and
the target Bluetooth device must be 1.5 to 5 meters!
Make sure the target Bluetooth device is enabled and
visible always!
The Bluetooth test will be done in following sequences:
Step 1: Enable Bluetooth; wait 4-5 seconds, shows OK;
There is a permission request, select 'Yes'.
Step 2: Searching;
Step 3: Show the Device Found list;
Step 4: Select the Target Bluetooth Device,
Step 5: Check the Pairing PIN code on both Target
Bluetooth Device and unit, press Pair on both, when
succeeded, it shows "Test Complete".
Press Back key to return to Service Test Menu.
1291-4298
Rev 1
Sony Mobile Communications AB – Company Internal
Test Instructions (mech)
Only symbolic view
14(29)