Replacement
REMOVAL
Pull out the Adhesive Battery in horizontal direction very
slowly, very carefully.
Make sure to keep horizontal direction!
Make sure not to deform the Battery!
After pulling out the entire adhesive, the Battery is
removable.
Scrap! Adhesive Battery Bottom & Adhesive Battery
Top are not to be reused.
INSTALLATION
Prepare the new Battery & Adhesive Battery Bottom &
Adhesive Battery Top & NFC Antenna.
Scrap! The parts listed above not to be reused.
Paste the Adhesive Battery Bottom & Adhesive Battery Top
along the guide line on the Main PBA.
1291-4296 Rev 1
© Sony Mobile Communications AB – Company Internal
26(46)