Table of Contents
Advertisement
1 Safety
The components described by this manual are intended to be used as part of an energy storage system and
installed per all local building codes and regulations in addition to the National Electrical Code, ANSI/NFPA 70
(for US) and Canadian Electrical Code (for Canada).
Throughout this manual, the following symbols will be used to highlight important information and procedures:
Symbol
Definition
WARNING! A dangerous voltage or
other condition exists. Use extreme
caution when performing these tasks.
CAUTION! This information is critical to
the safe installation and or operation of
the inverter. Follow these instructions
closely.
NOTE: This statement is important.
Follow instructions closely.
1.1 In Case of Emergency
In all cases:
If safe to do so, switch off the AC breakers (external to the system).
•
Contact the fire department or other required emergency response team.
•
Evacuate the area, and if applicable, follow your emergency evacuation plan if others are in proximity to
•
the installed location.
In case of fire:
When safe, use a fire extinguisher suitable for use; including A, B, and C dry chemical fire extinguishers
•
or carbon dioxide extinguishers.
In case of flooding:
Stay out of water if any part of the system or wiring is submerged.
•
Do not attempt to operate batteries that have been submerged in water even after they have been
•
dried.
In case of unusual noise, smell or smoke:
If safe to do so, ventilate the area.
•
1.2 Battery Safety Precautions
This product is integrated with an AGM type 12V, 9 Ah battery. Refer to the product manual for complete safety
instructions regarding the battery supplied with this product.
1.3 General Safety Precautions
Important! Installation, service, and operating personnel must read this
document in its entirety, and observe all safety and installation procedures as
described in this manual. Never operate system in a manner not described by this
manual.
Only qualified personnel should service this product.
Ensure all covers are securely fastened after installation is complete.
Personal Protective Equipment (PPE) in compliance with local work place safety standards
must be worn when working inside the cabinet.
Symbol
Definition
Meter measurement required.
Torque rating critical to operation.
Login to the remote monitoring system for
operating status
1
Advertisement
Table of Contents
