Advertisement
[LED Array Disassemble]
(1) Disassemle the CNT form LED Array.
(2) Separate the LED Array from Cover Bottom.
(3) Remove the double tape form Cover Bottom.
[LED Array Assemble]
(Step 1) Attach the Double Tape
1) Attach the Double Tape in Guide Line of Cover Bottom
2) Remove the protect film of Double Tape
(Step 2) Attach the LED Array
1) Attach the LED Array to the round hole on Cover Bottom embo.
2) Press the LED Array on the surface of Cover Bottom.
3) Connect the CNT to the LED Array.
* C/Bottom Guide Line
NG
OK
* Required LED Array Quantity
Inch
55
Q'ty(EA)
3
* Finish the Attached LED Array
- 16 -
Copyright ©
Only for training and service purposes.
LG Electronics Inc. All rights reserved.
Advertisement
