Advertisement
Move the camera to your start position and hit "OK".
Next you will see this screen.
Move the Gigapan to the end position and select "OK".
Next you will see the duration screen. You can set the length of the video pan in days, hours,
minutes, and seconds. Once set, hit the "OK" button.
At this point the Gigapan will ask if you would like to see the pan. Selecting "Yes" will cause the
unit to go to the start position, then move through to finish location to show a preview of the
motion. If you hit "X", it will ask if the camera is on and move to the start position. Then it will
ask if you have started the video recording. Once you hit "OK", it will then ask if you want to
start. Pressing "OK" starts the pan. Once the pan is complete, you will need to stop the video
manually.
Setting a 360 video pan is done the same way as a regular video pan except for the clockwise and
counter clockwise setting.
Advertisement
