Head light guard –honda crf1000l africa twin adventure sport (7 pages)
Summary of Contents for SRC H-CB19-12-01-SL
Page 1
2 ABS Sensor Guard (Rear) 3 Bush SRC Design uses Metric System of Measurement and all dimensions are in Millimeters * Recommended to use the Torque specified in the table ** Denotes Usage of Liquid Thread Locker in specified locations...
Page 2
Mounting Drawings ABS Sensor Guard (Front) ABS Sensor Guard (Rear) Copyright By SRC Design and Specification are subjected to change Page 2...
Page 3
(Front) (1) as shown, in-line with the Mounting Hole Step 3: Tighten the OE Bolt to the Mounting Hole as shown. The final Mounted Position is as shown in the drawing Copyright By SRC Design and Specification are subjected to change Page 3...
Page 4
Guard (Rear) (2) as shown, in-line with the Mounting Hole Step 3: Tighten the OE Bolt to the Mounting Hole as shown. The final Mounted Position is as shown in the drawing Copyright By SRC Design and Specification are subjected to change Page 4...
Page 5
Vehicle. We have prepared this based on our experience and knowledge, related to the Vehicle, Part and its functional aspects. 3. SRC cannot guarantee the interchangeability of the parts to any other manufacturer’s accessory part. It is advised to the User, to inspect and ensure the original state of all other Vehicle parts.