Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ronix 8611
Summary of Contents for Ronix 8611
- Page 1 CORDLESS BLOWER 8611...
-
Page 2: Specifications
1.87kg Battery Charging Time 60min Voltage DC-20V Battery Capacity 4.0Ah Supplied In Ronix Color box Continuous Working Time (All Diodes) 30min(Max air flow) Blow rubber tube, Dust bag, Includes 1pc 2.0Ah Battery, 1pc 2A Charger WARNING! Read this manual and general safety Instructions carefully before using the appliance, for your own safety. -
Page 3: General Power Tool Safety Warnings
GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in electric shock, fire and/ or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains operated (corded) power tool or battery operated (cordless) power tool. -
Page 4: Personal Safety
suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. - If operating a power tool on a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. - Page 5 POWER TOOL USE AND CARE - Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate of which it was designed. - Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
- Page 6 - Protect the battery against heat, against continuous intense sunlight, fire, water, and moisture. Danger of explosion. SERVICE - Have your power tool serviced by RONIX service center using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
-
Page 7: Description Of Function
DESCRIPTION OF FUNCTION WARNING! Always be sure the tool is switched off and unplugged before adjusting or checking the operation of the tool. ON / OFF SWITCH To start the machine, pull the switch trigger Release the switch trigger to stop. Switch trigger SPEED CONTROL The speed is increased by increasing pressure on the switch trigger... - Page 8 BLOWER For purging and install the branch pipe (1) on the blower outlet (2). Turn it clockwise until it clicks. SUCTION MODE For suction, place the inlet (3) on the suction port (4) and the dust bag (1) to the blower outlet (2). Turn clockwise until it clicks. USER MANUAL...
- Page 9 When the bag is full, empty the contents of the dust bag into the trash can. INSTALL OR RELEASE THE BATTERY To install the battery, push the battery by arrow(A). You can hear a “click”, indicating that the battery pack has been installed. To remove the battery, press the release button by arrow(B) and pull the battery by arrow(C).
-
Page 10: Maintenance And Service
MAINTENANCE & SERVICE MAINTENANCE AND CLEANING ATTENTION! Make sure the tool is switched off and unplugged before checking or performing maintenance. Every time after finishing work, it is rec-commended to clean the body of the instrument and the ventilation openings from dirt and dust with a soft cloth or napkin.
Need help?
Do you have a question about the 8611 and is the answer not in the manual?
Questions and answers