Black & Decker BXEH60001GB Manual page 6

ENGLISH (Original instructions)
Features
Water level indicator
1.
ON/OFF button
2.
Dry air outlet
3.
Air Inlet
4.
DC power socket
5.
Removable water tank
6.
Drain hole
7.
Flushing port
8.
Use
About the Controls
♦
Simple On/Off operation
♦
Removable water tank
Turning the unit on or off
♦
To power the unit on, push the power jack into the
unit's power socket and then plug into a mains
socket.
♦
Once the unit has been plugged into the mains,
press the On/Off button on the unit to turn it on.
The indicator light on the unit's control panel will
come on and air will start emitting from the front
grille.
♦
Press the On/Off button again to power the unit
off. Air will stop emitting from the front grille and
the indicator light will go out.
♦
Unplug the unit from the mains socket.
♦
WARNING: DO NOT store the unit immediately
after turning it off. Allow time for the unit to cool
down before storing.
Removing the water tank
♦
When the water tank is full, with approximately
900ml of water, the unit will automatically switch
off and the indicator light will flash.
♦
Press the ON/OFF button to switch off the unit.
♦
Remove the water tank and pour away the water.
♦
Replace the water tank in to the unit.
♦
To continue dehumidifying, push the ON/OFF
button again.
6
Cleaning and maintenance
WARNING: Before cleaning and maintenance,
switch the appliance off and remove the plug from
the socket, to prevent electric shock.
♦
Do not immerse any part of the appliance, power
cord or plug in liquids.
♦
Use a soft damp cloth to wipe the surface. Avoid
using detergent, spray or chemicals as these may
cause damage to the appliance.
NOTE:
The water tank can be disassembled for
cleaning.
Storing The Unit
WARNING: Unplug the unit from the mains and
ensure it has fully cooled down before storing.
Store in a cool, dry place, out of the reach of
children.