To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using
this unit, check the following points before requesting service.
No power
•
Ensure that the AC cord of the apparatus is connected properly.
•
Ensure that there is power at the AC outlet.
Remote control does not work
•
Before you press any playback control button, first select the correct source.
•
Reduce the distance between the remote control and the unit.
•
Insert the battery with its polarities (+/-) aligned as indicated.
•
Replace the battery.
•
Aim the remote control directly at the sensor on the front of the unit.
Poor radio reception
•
Increase the distance between the unit and your TV or VCR.
•
Fully extend the FM antenna.
Timer does not work
•
Set the clock correctly.
•
Switch on the timer.
Clock/timer setting erased
•
Power has been interrupted or the power cord has been disconnected.
•
Reset the clock/timer.
I can't find the Bluetooth name of this unit on my Bluetooth device for Bluetooth pairing
•
Ensure that the unit is switch on.
•
Ensure that the Bluetooth function is activated on your Bluetooth device.
This is a 15 mins power off function, one of the ERPII standard requirement for saving power
•
When the unit's external input signal level is too low, the unit will be turned off
automatically in 15 minutes. Please increase the volume level of your external device.
25
Troubleshooting