General Operation; Standby/On; Select Modes; Adjust Display Brightness - Horizon Fitness ACUSTIC O HAV-P4180 Operating Instructions Manual

Standby/ON

When you first connect the unit to the main socket, the unit will be in STANDBY mode.

Press the button on the remote control or on the unit to switch the main unit ON.

Press the button on the remote control or on the unit to switch the main unit back to Standby
mode.
- Disconnect the mains plug from the mains socket if you want to switch the unit off completely.
Tips:
- When turning the system on, the system will continue in the mode it was in when it was turned off last
time.
- If there is no signal input under the BT (Bluetooth) or LINE IN mode, the unit will automatically
switch off within 15 minutes.

Select Modes

Press the button on the main unit or the SOURCE button on the remote control repeatedly to select
the BT, LINE IN and FM mode. The selected mode will show on the display.

Adjust Display Brightness

Press the DIMMER button on remote control repeatedly to select different levels of display
brightness.

Adjust the Volume

- During play, press the VOL+/- buttons on remote control or on main unit to increase/decrease the
volume level.
- If you wish to turn the sound off, press the MUTE button on the remote control. Press the MUTE
button again or press VOL +/– buttons on remote control or on main unit to resume normal listening.

Set the Sleep Timer

This unit can switch to standby automatically after a set period of time.
1 Press the SLEEP button on remote control repeatedly to select a set period of time (in minutes).
90 60 30 15

When the sleep timer is activated, the display will show
before the unit powers off.

2 Press the SLEEP button on remote control repeatedly until [00] is displayed.

When the sleep timer is deactivated,

General Operation

00
" disappears from the display.
and the volume will gradually decrease
22