Set The Time; Set The Alarm Timer - Horizon Fitness ACUSTIC O HAV-P4180 Operating Instructions Manual

The built-in clock shows the correct time in the display.
1 In STANDBY mode, press and hold the CLOCK button on the remote control, the hour indicator
blinks.
2 Press the buttons on the remote control to set the hour. Then press the CLOCK button to confirm the
hour.
3 Press the buttons on the remote control to set the minute. Then press the CLOCK button to confirm
the minute. This will finish the clock setting.
Important:
- If no button is pressed for 15 seconds, the settings will be lost and you will need to start again.
• To display the clock time
- When you press the CLOCK button, the clock time is displayed. Press the CLOCK button again the
display returns to the original display.
You can set two alarms that go off at different times.
- Ensure that you have set the clock correctly.
1 In standby mode, press and hold the ALARM [1 or 2] buttons on remote control, the hour digits will
flash.
2 Press the buttons on the remote control to set the required hour. Then press the ALARM [1 or 2]
buttons to confirm the hour.
3 Press the buttons on the remote control to set the required minute. Then press the ALARM [1 or
2] buttons to confirm the minute.
4 Press the buttons on the remote control to select an alarm sound source:
• FM (to wake to your selected FM Radio Station)
• BUZZER (to wake to a buzzer sound)
Then press the ALARM [1 or 2] buttons to confirm.
5 Press the buttons on the remote control to select the required volume, we recommend no less
than 5 as a minimum. Then press the ALARM [1 or 2] buttons to confirm.
• Activate and Deactivate the Alarm Timer:
Press the ALARM [1 or 2] buttons repeatedly to activate or deactivate the timer. If
the timer is activated,
If the timer is deactivated, the
• Repeat Alarm:
You can press to adjust the interval to repeat alarm. When the alarm rings, press the SNOOZE button on
remote control. The alarm repeats ringing 9 minutes later.
• Stop Alarm Ring:
When the alarm rings, press the corresponding ALARM [1 or 2] buttons. The alarm stops, but the alarm
settings remain.
• View the Alarm Settings:
Press the ALARM [1 or 2] buttons to view the alarm settings.
21

Set the Time

Set the Alarm Timer

or is displayed.
or will disappear from the display on the front of the unit.