Error displays
Errors may be displayed while using an SD memory card. If an error occurs,
check the following table for a description of the error.
Error display
NO CARD
NO DATA
UNFORMAT
DATA ERROR
READ ERROR
WRITE ERROR
ERROR
?
UNEXPECTED
ERROR
NOTE:
B Press the SD MENU button to clear an error display.
B A 2-digit error code will be displayed with an error display.
You may need the error code when asking for service.
50
B There is no SD memory card inserted.
B The SD memory card does not contain any data that
can be played back by the projector.
B The inserted card does not match the required
specifications, for example the format is different.
B The data is not compatible and cannot be played
back.
B The data cannot be read from the card.
B The data could not be saved onto the card. Check if
the SD memory card is write-protected, or if it has
enough free space available.
B If "ERROR" is displayed instead of a thumbnail
image, it means that the image cannot be displayed
because there is no data or the data is incompatible.
B If "?" is displayed instead of a thumbnail image, it
means that only the thumbnail data cannot be found.
B An error occurred during an operation. If the problem
cannot be reset by pressing the SD MENU button,
turn off the projector's power while referring to
"Turning off the power" on page 23, and then turn the
power back on again.
Details