Use the AUX Socket
A. Use a RCA to 3.5 mm audio cable (not included) to
connect the TV's audio output sockets to the AUX 1 socket
on the unit.
B. Use a 3.5 mm to 3.5 mm audio cable (included) to connect
the TV's or external audio device headphone socket to the
AUX 1 socket on the unit.
Connect Power
Risk of product damage!
-
Ensure that the power supply voltage corresponds to the
voltage printed on the back or the underside of the unit.
-
Before connecting the AC power cord, ensure you have
completed all other connections.
Connect the mains cable to the AC~ Socket of main unit and
then into a mains socket.
Standby/ON
When you first connect the unit to the main socket, the unit will be in STANDBY mode. The POWER indicator
will light up red.
Press the
button on the remote control to switch the main unit ON or OFF.
Disconnect the main plug from the main socket if you want to switch the unit off completely.
- If a TV or an external device (Only for AUX socket) is connected, the unit will switch on
automatically when the TV or the external device is switched on.
- When the unit has no input signal for over 15 minutes, it will automatically switch to Standby mode.
Select Modes
Press the SOURCE button on the unit repeatedly or press the AUX, BT (Bluetooth), OPTICAL, COAXIAL, HDMI
ARC buttons on the remote control to select the desired mode.
•
Red indicator: In STANDBY mode.
•
Green indicator: In AUX mode.
•
Orange indicator: In Optical mode.
Orange flash: In Coaxial mode.
•
Blue indicator: In Bluetooth mode.
•
Orange indicator: In HDMI ARC mode.
Basic Operation
Headphone
22