Table of Contents
Advertisement
22
EN
Setting O f The Colour System Select Buttons
COLOUR
SYSTEM
* "NTSC [ PAL" and "SECAM" appears during playback only.
O ff-Air Recording
The built-in multi-system tuner is capable of receiving PAL B/G, D/K and I and SECAM B/G and D/K broadcasts.
TV system
PAL B/G, D/K, I
SECAM B/G,
D/K (OIRT)
N O TE:
This model does not operate in BRAZIL (PAL-M) or ARGENTINA (PAL-N).
Downloaded from:
https://www.usersmanualguide.com/
IN FO RM ATIO N O N M U LTI-SYSTEM CO M PATIBILITY
M ode
AUTO
NTSC PAL*
PAL
MESECAM
SECAM*
Multi-system
tuner
(B/G, D/K, I)
Use the CO LO U R SYSTEM button on the recorder's front panel
to select the colour system. Pressing this button changes the
mode as illustrated on the left. The On-Screen display will show
which mode is selected.
M ode D isplay
AUTO
Usually set to this mode. This mode
(Colour Signal) automatically detects PAL, NTSC*, SECAM
or MESECAM and adjusts to the colour
system being recorded or played back.
When it does not perform properly, set the
colour system manually.
* NTSC recording is not possible with this
recorder.
MANUAL
For recording, there is a choice of 2
(Colour Signal) selectable modes; PAL/MESECAM. Select
the mode that matches the colour signal
being received. For playback, there is an
additional mode which allows NTSC tapes
to be played back and viewed on PAL TVs.
N O TES:
● SECAM signals will always be recorded as MESECAM. Select
the AUTO or the MESECAM mode when recording SECAM
signals.
● When playing back a SECAM tape, select the AUTO or the
SECAM mode. SECAM signals will always be played back as
SECAM.
● For SECAM tapes, only SP recordings can be played back on
this recorder.
H R-J347EM
Recording circuit
PAL
MESECAM
D escription
Recorded tape
PAL
MESECAM
Advertisement
Table of Contents
