JVC HR-J347EM Instructions Manual page 17

Hide thumbs Also See for HR-J347EM:
Table of Contents

Advertisement

O K
N O TES:
● The Auto SP/LP Timer feature is not available during ITR
(Instant Timer Recording), and the feature will not work
properly with any tapes longer than E-180 as well as some
tapes of shorter lenghs.
● Even if, in step
1 , you press AU TO SP/ LP TIM ER and it lights
" orange" , that doesn't mean that the recorder will automati-
cally change from SP to LP mode during the course of the
recording. Watch the tape later to confirm.
● If you have programmed the recorder to timer-record 2 or
more programs, the second programme and those thereafter
may not fit on the tape if you engage the Auto SP/LP Timer
mode. In this case, make sure the mode is not engaged, then
set the tape speed manually during timer programming.
● There may be some noise at the point on the tape where the
recorder switches from SP to LP mode.
Downloaded from:
https://www.usersmanualguide.com/
1
2
3
4
5
6
7
8
9
/
W EEKLY
0
4
2
TV PRO G
1
3
¡
7
8
1
4
¢
3
AU TO SP/ LP TIM ER Indicator
RETURN TO N O RMAL
SCREEN
8
After confirming all information is correct, press O K
and the normal screen appears.
● Repeat steps
EN GAGE RECO RDER'S
TIMER MO DE
TIM ER
9
Press TIM ER . The recorder turns off automatically.
To Timer-Record Weekly Or Daily Serials . . .
. . . anytime during steps 2 through 7 , press W EEKLY ( N U M BER
key " 9" ) for weekly serials or D AILY ( N U M BER key " 8" ) for
daily serials (Monday–Friday). Either "WEEKLY" or "DAILY"
appears on the screen. Pressing the button again makes the
corresponding indication disappear.
N O TE:
You can programme this recorder to timer-record as many as 8
programmes. If you try to programme the recorder to record a
ninth, "PROGRAM FULL" appears on screen. To record the
extra programme, you must first cancel any unnecessary
programmes (
Auto SP/ LP Timer
If, when recording in SP mode, there is not enough tape to
record the entire programme, the recorder automatically
2
3
switches to LP mode to allow complete recording.
EN GAGE AUTO SP/ LP
q
5/8
TIMER
1
Press AU TO SP/ LP TIM ER on the recorder front panel.
The AUTO SP/LP TIMER indicator lights " orange" .
For Example . . .
Recording a PAL-broadcast program of 210 minutes in
length onto a 180-minute tape
Make sure you press AU TO SP/ LP TIM ER before
performing timer programming.
1 – 8 for each additional programme.
pg. 19).
Approximately 150
Approximately 60
minutes
minutes
SP mode
Total 210 minutes
17
EN
LP mode

Advertisement

Table of Contents
loading

Table of Contents