Table of Contents
Advertisement
¡ The appliance is secured for transportation using transit bolts.
Transit bolts which have not been removed may result in ma-
terial damage and damage to the appliance.
▶ Before starting up the appliance, remove the transit bolts
completely and keep them in a safe place.
▶ Before transport, fit the transit bolts fully in order to prevent
damage in transit.
¡ If the water pressure is too high or too low, this may impair
functioning of the appliance.
▶ Make sure that the water pressure in the water supply sys-
tem is min. 100 kPa (1 bar) and max. 1000 kPa (10 bar).
▶ If the water pressure exceeds the maximum value specified,
a pressure-reducing valve must be installed between the
drinking water connection and the hose set of the appli-
ance.
¡ Modified or damaged water hoses may result in material dam-
age and damage to the appliance.
▶ Never kink, crush, modify or cut through water hoses.
▶ Only use the water hoses supplied with the appliance or
genuine spare hoses.
▶ Never re-use water hoses that have been used before.
¡ Unsuitable cleaning products may damage the surfaces of the
appliance.
▶ Do not use harsh or abrasive detergents.
▶ Do not use cleaning products with a high alcohol content.
▶ Do not use hard scouring pads or cleaning sponges.
▶ Clean the appliance with nothing but water and a soft,
damp cloth.
▶ Remove all detergent residue, spray residue or other
residues immediately if they come into contact with the ap-
pliance.
Safety en
11
Advertisement
Table of Contents
