Headlight (Low Beam)/Turn Lights; Headlight (High Beam); Winch; Lh Brake Lever - ODES 1000ATV-L Owner's Manual

(15)Headlight (low beam)/turn
lights
The low beam is for close lighting

(16) Headlight (high beam)

The high beam can improve the line
of sight and expand the field of view.

(17) Winch

The winch can be actuated using the
winch control switch or with the
remote control (sold separately).
NOTE: Using the winch intensively
over a long period of time may
discharge the battery.
The following tips will help to reduce
the risk of discharging the battery:
Always unreel manually: Unlock the
cable using the handle then pull on
the hook strap to unreel.
It is recommended to let the vehicle
run while winching. Do not stop
vehicle immediately after winching to
let battery recharge.
Also, when winching for more than
30 seconds, it is recommended to
increase engine RPM in the range of
3000 RPM to increase charging
power to the battery.
NOTE: Make sure vehicle is in
NEUTRAL (N) before increasing
engine RPM.
Refer to BASIC
WINCHING ТЕCHNIQUES for more
information about the winch.
To power up the vehicle without
starting the engine, refer to WAKING
UP THE ELECTRICAL SYSTEM.

(18)LH Brake Lever

When the LH brake lever is pressed
the front and rear brakes are applied.
When released the brake lever
should automatically return to its
original position.
Braking effect is proportional to the
force applied on the lever.
NOTE: As on other wheeled vehicles
the vehicle weight is transferred to
the front wheels when braking. To
obtain greater stopping efficiency,
the brake system distributes more
braking force to the front wheels.
This will affect vehicle handling and
steering control
vigorously. Take it into account when
braking.
TYPICAL
GUIDE TO
when braking
57