Table of Contents
Advertisement
15.2 Changing the basic set-
tings
Set the programme selector to po-
1.
sition 1.
Press
centrif. and, at the same
2.
time, turn the programme selector
to position 2.
a The display shows the current
value.
Set the programme selector to the
3.
required position.
→ "Overview of the basic settings",
Page 34
To change the value, press
4.
min..
To save the changes, switch off
5.
the appliance.
16 Programme counter
The program counter displays the
number of finished programmes.
16.1 Calling up the pro-
gramme counter
Set the programme to position 1.
1.
Press
centrif. and set the pro-
2.
gramme to position 2 at the same
time.
Set the programme to position 5.
3.
17 Cleaning and servi-
cing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
17.1 Cleaning the drum
CAUTION
Risk of injury!
Permanently washing at low temper-
atures and a lack of ventilation for
the appliance may damage the drum
and cause injury.
Regularly run a programme for
▶
cleaning the drum or wash at tem-
peratures of at least 60 °C.
Leave the appliance to dry after
▶
every operation with the door
open, and leave the detergent
drawer to dry.
Run the limp. tambor programme
▶
without laundry and using washing
powder.
ter-
17.2 Cleaning the detergent
Pull out the detergent drawer.
1.
Press down on the insert and re-
2.
move the detergent drawer.
Programme counter en
drawer
35
Advertisement
Table of Contents
