Right-Click Commands - Delta Vivotek RX9502 User Manual

2-2-4. Right-click Commands

Left-click to select a camera. Right-click to display the selection menu.
1. Camera information: Click to display camera name, resolution, codec, or frame rate on the
view cell. The information will display on the upper left corner of a view cell.
2. Stream: Default is enabled. The Auto adaptive stream automatically polls a video stream of
a smaller resolution (changing the resolution of stream #2) in order to reduce the streaming
efforts. For example, when a view cell is placed in a 3x3 monitor layout, it may not be
necessary to stream the video in its full resolution. In a full view, the system displays a video
in its full resolution. Due to the size of view cells on your monitor, when in a multi-cell layout,
the system automatically polls the camera for a smaller resolution stream.
The Auto adaptive stream feature can be disabled if you prefer consistent display resolution.
3. Disable live streaming: Use this to disable the current live streaming.
4. Fit screen with ratio: The Receiver server automatically optimizes the display camera view
cells. However, you can still select this option to display the camera's original aspect ratio: for
example, the original video feed can be 4:3. Without the fit screen, every camera's image will
be expanded to fill the view cell.
5. Show VCA rule: If you have configured the video analytics rules on the camera, enable this
to display the VCA rules detection lines and zones.
6. Show tool bar: You can hide the tool bars by deselecting this option.
7. Pin status bar: You can hide the time stamp bars by deselecting this option.
8. Log in: Log in to enable system configuration.
VIVOTEK - Built with Reliability
User's Manual - 33