Onkyo TX-RZ730 Instruction Manual page 125

4. Source 1. IntelliVolume
2. Name Edit
Audio Select
Video Select
5. Hardware 1. HDMI
2. Network
3. Bluetooth
4. Power Management
5. 12V Trigger
6. Multi Zone 1. Zone 2
2. Zone 3
3. Remote Play Zone
7. Miscellaneous 1. Tuner
2. Remote ID
3. Firmware Update
4. Initial Setup
5. Lock
Contents
Adjust the volume level when there are differences in volume level among multiple devices
connected to this unit.
Set an easy name for each input.
Select the priority for input selection when multiple audio sources are connected to one input
selector.
When "TUNER", "NET", or "BLUETOOTH" input is selected, you can set the input from which
video is displayed on the TV.
Change the settings for the HDMI functions.
Change the settings for the Network functions.
Change the settings for the Bluetooth function.
Change the settings for the power-save function.
Change the settings for 12V Trigger OUT jack.
Change the settings for Zone 2.
Change the settings for Zone 3.
Change the settings for remote play.
Change the frequency step for the tuner.
Change the remote controller ID.
Change the settings for Firmware Update.
Make the initial setup from the setup menu.
Lock the Setup menu so that the settings cannot be changed.
125
Connections
≫ ≫
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫
p138
p138
p139
p139
p140
p141
p143
p143
p144
p145
p145
p145
p146
p146
p146
p146
p146
≫