Settings; Installing The Batteries; Connecting The Handset/Telephone Line Cord - Panasonic KX-TS600W Operating Instructions Manual

Settings

Installing the Batteries

• Batteries are not included in the unit.
• Install three high quality "AA" size Alkaline (LR6) or Manganese (R6, UM-3)
batteries. We recommend to use Panasonic batteries.
Battery life is: —about six months in use of Alkaline batteries.
Battery life may depend on usage conditions and ambient temperature.
• Make sure batteries were inserted properly in phase to ensure the functionality of
this unit.
• Please refer page 44 for the battery replacement and precautions.
THE UNIT MAY NOT WORK PROPERLY WITHOUT BATTERIES.

Connecting the Handset/Telephone Line Cord

After connection, lift the handset to check for a dial tone.
LINE
Telephone Line
Cord
To Single-Line
Telephone Jack
• Use only a Panasonic Handset for the KX-TS600W or KX-TS600B.
• Use only a telephone line cord included in the unit.
• If your unit is connected to a PBX which does not support Caller ID services, you
cannot access those services.
6
For assistance, please visit http://www.panasonic.com/phonehelp
—about three months in use of Manganese batteries.
1
Press down in the direction of the arrow
and open the cover (1).
2
Install the batteries in the proper order
as shown (2), matching the correct
polarity.
3
Close the battery cover.
Handset
Handset Cord