Connecting Antennae, Internet And External Devices - UD 24W5210 User Manual

Connecting antennae, Internet and external devices

Connecting a digital audio system
You can connect your TV set to a digital audio system (e.g. amplifier, home cinema).
Connect the plug at the
end of a coaxial audio
cable (not supplied) to the
Digital Audio
connection on your TV set.
Connecting headphones
You can connect headphones or an
analogue playback device to the socket
marked with a headphones symbol. Use
an audio cable with a 3.5 mm jack-type
plug.
CI card slot
If you have purchased a subscription for
watching scrambled programmes with a Pay TV provider, you can insert the module with
the CI or CI+ card into this slot. For more information, please read the documentation
supplied with your CI card.
Caution! Switch your TV set off before inserting or removing the CI module.
Otherwise you could damage the module or the TV set.
Inserting the CI card
Insert the module with the CI
or CI+ card into the CI card
slot. Make sure it is the right
way around.
Removing the CI card
To remove the
carefully pull it out of the CI card slot.
The CI/CI+ module is initialised after you switch the TV set on. This may take a little while.
You should then be able to view the scrambled
channels. If this is not the case, consult your Pay TV
provider to check that the signal has been enabled for
you.
Connecting USB device
The TV has USB 2.0 ports for connection with
appropriate mass storage devices.
Out
CI card,
10