Table of Contents
Advertisement
Quick Links
Read this instructions before operation
Digital Handset Operation
Picture
1. Initialization procedure
Step
Operation
Press and hold ▲&▼simultaneously
1
more than 6 seconds
Keep pressing ▲&▼
2
Release ▲&▼ together
3
The initialization procedure must be completed before the first running after table is installed or parts replaced
2. Move up and down
Step
Operation
Press and hold ▲
1
Release ▲
2
Press and hold ▼
3
Release ▼
4
3. Set memory positions 1/2/3
Step
Operation
Press and hold ▲ or ▼，then release
1
2
Click button S, then click button 1 or 2 or 3
within next 3 seconds
4. Move to the memorized positions
Step
Operation
KDH064B USER OPERATION INSTRUCTION
Http://www.czkaidi.com
Motion
Legs begin to move down at a half speed of normal operation
Legs move down to the lowest position and rebound 2-5 mm, then stop
Initialization is completed
Motion
Legs move up
Legs stop
Legs move down
Legs stop
Motion
Run the legs to the position you want the table surface to be
Position 1 or 2 or 3 is saved
Motion
- 1 -
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Teknion KDH064B
Summary of Contents for Teknion KDH064B
- Page 1 KDH064B USER OPERATION INSTRUCTION Read this instructions before operation Digital Handset Operation Picture 1. Initialization procedure Step Operation Motion Press and hold ▲&▼simultaneously Legs begin to move down at a half speed of normal operation more than 6 seconds Keep pressing ▲&▼...
- Page 2 Press and hold the button 1 or 2 or 3 Legs return to the corresponding position saved Turn on/off the one touch key function Step Operation Motion Press key “S” for more than 5 seconds Screen flashes “---” Release key “S”, then press key”1” in 3 seconds. Letter “H-0”...
- Page 3 8. Lock the Bottom stroke limit Step Operation Motion Press and hold ▲or▼, then release Run the legs to the position you want the table surface to be Letter “ ” is indicated on the screen. That means the position is locked at the Press and hold button S, then press and hold 1, keep about 3 seconds lowest position that the table can be moved to...
- Page 4 Error code Step Operation Motion Leg malfunction legs loosed to the control box, check the cable connection, ensure the connection. Inner parts of legs are broken, replace the legs Table top overload Too many loads on table top, remove the loads. Control box malfunction under extreme environment, operating will cause the control box malfunction, initial procedure needed...
- Page 5 TROUBLE SHOOTING Fault Phenomenon Handling After connecting the power, press ▼ or ▲, the legs have no Re-initialize the table; response. Check if the connection is correct or not; Please contact with your supplier. After connecting the power, press and hold ▼ and ▲, the legs Check if the connection is correct or not;...
Need help?
Do you have a question about the KDH064B and is the answer not in the manual?
Questions and answers