Subscribe to Our Youtube Channel
Related Manuals for Teknion D06-4726
Summary of Contents for Teknion D06-4726
- Page 1 Guide no: DIS_001 District Date: Sept_2020 User Instruction Display Switch w\ Memory (D06-4726) Note: Please Use the Below Mentioned Instruction to Setup the Display Switch.
- Page 2 KDH064B USER OPERATION INSTRUCTION Read this instructions before operation Digital Handset Operation Picture 1. Initialization procedure Step Operation Motion Press and hold ▲&▼simultaneously Legs begin to move down at a half speed of normal operation more than 6 seconds Keep pressing ▲&▼ Legs move down to the lowest position and rebound 2-5 mm, then stop Release ▲&▼...
- Page 3 Turn on/off the one touch key function Step Operation Motion Press key “S” for more than 5 seconds Screen flashes “---” Release key “S”, then press key”1” in 3 seconds. Letter “H-0” or “H-1” is indicated on the screen. That means the function is turned on or turned off “H-0”...
- Page 4 8. Lock the Bottom stroke limit Step Operation Motion Press and hold ▲or▼, then release Run the legs to the position you want the table surface to be Letter “ ” is indicated on the screen. That means the position is locked at the Press and hold button S, then press and hold 1, keep about 3 seconds lowest position that the table can be moved to...
- Page 5 Error code Step Operation Motion Leg malfunction legs loosed to the control box, check the cable connection, ensure the connection. Inner parts of legs are broken, replace the legs Table top overload Too many loads on table top, remove the loads. Control box malfunction under extreme environment, operating will cause the control box malfunction, initial procedure needed...
- Page 6 TROUBLE SHOOTING Fault Phenomenon Handling After connecting the power, press ▼ or ▲, the legs have no Re-initialize the table; response. Check if the connection is correct or not; Please contact with your supplier. After connecting the power, press and hold ▼ and ▲, the legs Check if the connection is correct or not;...
Need help?
Do you have a question about the D06-4726 and is the answer not in the manual?
Questions and answers