Table of Contents
Advertisement
3 1 – Area code – Local phone
number
Example:
4
{C}
Caller ID number auto edit
feature
Once you call back an edited number, the
unit will remember the Area Code and
Format of the Edited Number. Next time
when someone calls from the same Area
Code, caller information will be customized
by the unit as follows:
– When the call is being received, the
Caller ID number will be displayed in the
same Format as the Edited Number.
– After the call is ended, the telephone
number of the caller, when reviewed
from the Caller list, will be displayed in
the same Format as the Edited Number.
For example, you can use this feature to
set the unit to ignore the area code of
callers in your area code, so that you can
call these local numbers using caller
information without dialing the area code.
To activate this feature, you must edit an
item in the caller list, then call that number.
After that, phone numbers from that
caller's area code are edited automatically.
This feature can be turned on or off (page
31).
Note:
L Phone numbers from the 4 most recently
edited area codes are automatically
edited.
L If you move to another area, you can
turn this feature off to erase previously
edited area codes. To use this feature
For assistance, please visit http://www.panasonic.com/phonehelp
1-555-321-5555
again, turn it on and reprogram the area
codes you want to edit once again.
Storing caller information into
the handset phonebook
1
{CID} (left soft key)
2
Select the desired item. i {SELECT}
L To edit the number, press {EDIT}
repeatedly until the phone number is
shown in the desired format.
3
{SAVE}
4
Continue from step 3, "Editing items in
the handset phonebook", page 22.
Erasing selected caller
information
1
{CID} (left soft key)
2
Select the desired item.
3
{ERASE} i "Yes" i {SELECT}
i {OFF}
Erasing all caller information
1
{CID} (left soft key)
2
{ERASE} i "Yes" i {SELECT}
Caller ID Service
27
Advertisement
Table of Contents
