Table of Contents
Advertisement
To record stereo and bilingual programmes (A2)
● Stereo programmes are automatically recorded in stereo on the
Hi-Fi audio track (with the normal audio track recording mixed
L and R channel sound).
● Bilingual programmes are automatically recorded in bilingual
on the Hi-Fi audio track. The main soundtrack is recorded on
the normal audio track.
To record NICAM stereo and bilingual programmes
The NICAM audio programme is recorded on the Hi-Fi audio
track, and the standard audio programme on the normal audio
track.
NOTES:
● If the quality of stereo sound being received is poor, the
broadcast may be received in monaural with better quality.
● Before playing back a programme recorded in stereo, or a
bilingual programme, refer to "Selecting Soundtrack" (
S-VHS (Super VHS), S-VHS ET or VHS Recording
Mode
This VCR can record in S-VHS (Super VHS), S-VHS ET or VHS.
● To record in S-VHS:
Set "S-VHS" to "ON" (
"S-VHS". The S-VHS indicator lights up on the display panel.
The S-VHS recording mode is selected.
● To record in S-VHS ET on a VHS cassette:
Set "S-VHS ET" to "ON" (
"VHS". The S-VHS indicator lights up on the display panel.
● To record in VHS:
Insert a cassette marked "VHS".
Set "S-VHS ET" to "OFF" (
● To record in VHS on a S-VHS cassette:
Insert a cassette marked "S-VHS". The S-VHS indicator lights up
on the display panel. Then, set "S-VHS" to "OFF" (
S-VHS indicator goes off.
The VHS recording mode is selected.
NOTE:
When playing back a tape that has been recorded in S-VHS or
S-VHS ET, the S-VHS indicator lights up on the display panel
regardless of the "S-VHS ET" (
setting.
Timer Recording
Up to 8 timer recording programmes can be made.
Before starting:
● Set the clock properly. (
● Set "COLOUR SYSTEM" to the appropriate mode. (
● Load a cassette with the record safety tab intact.
NOTES:
● PDC recording is not possible in Central and Eastern Europe.
● If all the 8 programmes have already been set, "PROGRAM
FULL" appears on the screen.
● If the clock is not set, "CLOCK MUST BE SET" appears on the
screen.
● If there is a conflict in the timer schedule and one programme
overlaps with another, the programme starting earlier or
programme with the lower programme number will be
recorded.
● After timer recording is completed, the recorder turns off
automatically.
● If the tape reaches its end during timer recordings, the recording
stops and " # ", "
" and " $ " on the display panel blink. Press
# to disengage timer, then press 0 on the recorder to eject
the cassette or press 1 then press 3 to rewind the tape.
● You can programme the timer recording while a regular
recording is in progress; the menu screens will not be recorded.
12). Then, insert a cassette marked
11). Then, insert a cassette marked
11).
11) or "S-VHS MODE" (
13)
6).
S
V
HOW
IEW
The S
V
HOW
in most TV listing.
A
Press PROG to access the Timer Programming Set screen.
B
Press rt to place the pointer next to
"S
V
HOW
IEW
S
V
NO. screen appears.
HOW
IEW
12). The
C
Press the appropriate number keys to
input the S
HOW
12)
OK. The S
HOW
appears.
● If the number you entered is invalid,
"ERROR" appears on the screen. Press
& and input a valid S
number.
● Make sure the channel position
number you wish to record is displayed; if "TV PROG" displays
"– –", set the channel position number correctly. Press PR r/t
to input the channel position number on which your recorder
receives the station. Then press OK.
12)
● To set the tape speed, press SP/LP (p).
● To set the VPS/PDC mode, press VPS/PDC (number key "7").
● To change the stop time, press STOP
and/or "5").
● To timer-record daily (Monday–Friday) or weekly serials, press
DAILY (number key "8") or WEEKLY (number key "9"). Pressing
the button again makes the "DAILY" or "WEEKLY" display
disappear.
● To change the channel position number, press PR r/t.
D
Press OK or PROG.
E
Press #. The recorder turns off automatically and "#" is
displayed on the display panel.
To timer-record a satellite broadcast using the S
A Set "L-2 SELECT" to "A/V" (
B Perform steps 1 1 1 1 – 5 5 5 5 .
C Set the satellite receiver to the appropriate channel before the
selected programme begins.
D Leave the satellite receiver's power on.
— 8 —
®
Timer Programming
numbers are the numbers next to the programme
IEW
", then press OK or e . The
V
number, then press
IEW
V
program screen
IEW
V
HOW
IEW
10).
/
(number keys "2"
V
system:
HOW
IEW
Advertisement
Table of Contents
