Clock Set - JVC HR-S5966EK Instructions Manual
Hide thumbs
Also See for HR-S5966EK:
- Instructions manual (60 pages) ,
- Schematic diagrams (22 pages) ,
- Instructions manual (60 pages)
Table of Contents
Advertisement
52
advanced features
Clock Set
You should only need to perform this function if:
• Auto Clock Set was not performed correctly by Auto Setup, Preset Download or Auto Channel
Set
• The VCR's memory backup has expired
• You want to change the Just Clock setting
Setting the Clock
get to the initial set screen Press
and
PR
get to the clock set screen Move the highlight bar to CLOCK SET using the
buttons and press
set time and date When the CLOCK SET screen appears, the time will be blinking. Use the
and
PR
advance the time in 30 minute increments) and then press
(or E). The date will blink. Use the
set the correct date (pressing and holding will advance the date in
15 day increments) and then press
year in the same way and press
set just clock Set as desired using the
then press
set preset for clock data source If you have set JUST CLOCK to ON , you will need to
specify a preset (station) for
buttons to select the preset and press
start clock operation Press
NOTE:
If the recorder's memory backup has expired or the AC was disconnected from the recorder, the
recorder will automatically perform Auto Clock Set when the power is restored.
Notes on Just Clock
Some TV stations transmit a time signal with their broadcasts. This VCR has the ability to use
this signal to update its internal clock (including the adjustment for British Summer Time). It will
do this every hour except for 23:00, 00:00, 01:00 and 02:00. By setting Just Clock to
enabling the VCR to do this.
Just Clock is not effective in the following circumstances:
• when the VCR is powered on
• when the VCR is in Timer or Auto Satellite Programme Recording modes
• when a difference of more than 3 minutes between the internal clock and the time signal exists.
• when reception conditions are poor.
buttons and press
PR
(or E).
buttons to set the correct time (pressing and holding will
(or E).
JUST CLOCK
. Move the highlight bar to
(or E).
and
buttons to
PR
PR
(or E). Set the correct
.
and
buttons
PR
PR
to take its source data from. Use the
(or E).
.
using the
INITIAL SET
and
PR
PR
PR
CLOCK SET
TIM E
DATE
YEAR
0: 00
01 . 01
03
JUST CLOCK : ON
TV PR.
:
1
[1] a k
[M ENU]: EXIT
and
PR
PR
, you are
ON
Advertisement
Chapters
Table of Contents
