Tuner Set - JVC HR-S5966EK Instructions Manual

46
advanced features

Tuner Set

The VCR needs to find, identify and memorise all available stations in your area in order to
record programmes correctly. Once done, pressing the
jump to the available channels without going via any vacant channels. This channel search
can be done either automatically or manually. You should only need to perform either of the
following procedures if Auto Setup has failed to identify and record available channels or
you have moved to a new area.
Auto Channel Setup
get to the main menu Press
perform auto channel set Move the highlight bar to AUTO CH
using the
SET
rf and scart connection If you have chosen to connect the
VCR to the TV with both the RF Cable and a 21-pin SCART Cable
(not provided) and the TV set is in its AV mode (see the TV
manual), the
there for about 4–12 minutes while the VCR searches for receivable
stations. During Auto Channel Set the S mark on the screen moves
from left to right.
[MENU]:EXIT
its search, the confirmation screen will appear showing the details
( = Preset Number,
PR
Name) of the TV stations that the process has found. The first
station will have a highlight bar over it and will be blinking. This
screen and the programme currently being broadcast on the
selected station will alternate at 8 second intervals. To view the
next channel, press the
highlight bar to the required channel.
return to normal screen Press
NOTES ON CHANNEL RECEPTION
incorrect station id In certain reception conditions, station names may not be stored
correctly by the VCR and Auto Guide Program Number Set may not work properly. If the Guide
Program Numbers are not set, entering a PlusCode number, may result in an incorrect channel
being recorded.
poor reception The VCR memorises all stations found regardless of their quality. If a station's
quality is poor, you can delete that station from the memory (see page 47).
and buttons and press
PR
PR
screen will appear on the TV and remains
AUTO SET
AUTO SET
PLEASE WAIT
The caption
about 5 seconds.
confirmation screen Once
Auto Channel Set has completed
= Channel Number and
CH
and
PR
.
(or E) twice.
SCAN COMPLETED
= Station
ID
buttons to move the
PR
.
or buttons enables you to
PR
PR
MAIN MENU
MODE SET
F
AUTO CH SET
MANUAL CH SET
OUTPUT/INPUT SET
INITIAL SET
[1] a k
[MENU]: EXIT
appears at the end of the process for
PR CH ID
01 26 BBC1
02 33 BBC2
03 23 ITV
04 30 CH4
05 37 CH5
06 - - - -
07 - - - -
[10]
a k: EDIT
a [x]: DELETE
[MENU]: EXIT
PR CH ID
08 - - - -
09 - - - -
10 - - - -
11 - - - -
12 - - - -
13 - - - -
14 - - - -