JVC GR-SXM320 Instructions Manual page 45

Indications During Playback
1 2
T B C
M
V O LUM E
9
Warning Indications
Indications
TAPE END
LENS COVER
CONDENSATION
PLEASE WAIT
TAPE HEAD IS DIRTY
USE CLEANING
CASSETTE
E01 — E06
SAFEGUARD FUNCTION
HAS BEEN ACTIVATED
REATTACH BATTERY
Downloaded from:
3 4 5 6
–
S E T S P
– :
1 2 3
– 0 : :
1 2 3 4
–
– – – – – – – –
6
Displays the battery remaining power.
Remaining power level: high. It does not necessarily mean that the battery
pack is fully charged.
Remaining power level: exhausted
As the battery power comes close to nil, the battery indicator
(battery power warning).
When the battery power is exhausted, power turns off automatically.
Blinks when no cassette is loaded, or when the Erase Protection tab is not in
the position that allows recording.
Blinks for approx. 10 seconds when the power is turned on. This display also
blinks when the clock (lithium) battery is either not installed or has discharged.
Install or replace the old battery with a new one.
Appears when the tape ends during recording, playback or fast-forward.
Blinks for approx. 5 seconds when the camcorder is turned on with the lens
cover closed.
These 2 warnings appear alternately every 3 seconds if condensation occurs. In this
case, all functions except tape eject and power on/off are disabled. Turn the unit off
(without removing the power supply), wait a few minutes for the warnings to clear,
and turn it on again.
These 2 warnings appear alternately every 3 seconds if dirt is detected on the
heads during recording. In this case, use an optional cleaning cassette. If the
warning remains after cleaning, consult your nearest JVC dealer.
The error indications (E01 — E06) show what type of malfunction has occured.
If an error indication and warning appear, turn the unit off, remove the power
supply (battery, etc.) and wait a few minutes for them to clear. When it does,
you can resume using the camcorder. If the indication remains, consult your
nearest JVC dealer.
https://www.usersmanualguide.com/
1
•
Displayed when a tape is loaded.
•w: Insert Editing Indicator ..................
7
Displayed during Insert Editing.
2
TBC Indicator ......................................
3
Recording Format Indicator (S/S-ET)
4
(GR-SXM320/SX851 only) ....................
:
4 5
4
Tape Counter .................................
A T
5
Recording Mode Indicator (SP/EP) ........
6
Tape Running Indicator
4
3 : Fast-Forward/Shuttle Search
2 : Rewind/Shuttle Search
6
e4 : Audio Dubbing
7
Tracking Indicator ................................
+
– –
8
Tape Counter .......................................
Displayed only during Insert Editing.
8
9
•BRIGHT: Bright Level Indicator
(GR-SXM320 only) ............................
•VOLUME: Speaker Volume
Indicator (GR-SXM320 only) ..............
Function
: Cassette Indicator
: Playback
: Pause
45
EN
pg. 38
pg. 32
pg. 13
pg. 32, 38
pg. 12
pg. 32
pg. 38
pg. 31
pg. 31
blinks
( pg. 10)
( pg. 10)
( pg. 17)
( pg. 16)