Table of Contents
Advertisement
en Installation and connection
Pull the hoses out of the holders.
1.
Unscrew
and remove
2.
screws for the 4 transit bolts with a
WAF 13 wrench.
Remove the power cable from the
3.
holder.
14
Remove the 4 sleeves.
4.
all
Put on the 4 cover caps.
5.
Press down on the 4 cover caps.
6.
4.5 Tools for assembly
You require the following tools for the
assembly:
¡ Spirit level
¡ Wrench, WAF 13
¡ Wrench, WAF 17
¡ Forstner 35 mm drill bit
Advertisement
Table of Contents
