Table of Contents
Advertisement
Press down on the 4 cover caps.
6.
4.5 Tools for assembly
You require the following tools for the
assembly:
¡ Spirit level
¡ Wrench, WAF 13
¡ Wrench, WAF 17
¡ Forstner 35 mm drill bit
¡ 2 mm twist drill
¡ Screwdriver
4.6 Installing the appliance
Preparing the appliance
To make it easier to slide in the
1.
appliance, turn in the appliance's
rear feet until the appliance is on
the runners.
Installation and connection en
Measure the built-in niche.
2.
Lay the power cord as well as the
3.
water inlet and water drain hose.
Slide the appliance in and, at the
4.
same time, pull through the power
cord, water inlet and water drain
hose.
Connect the water inlet hose.
5.
→ "Connecting the water inlet
hose", Page 20
Connect the water drain hose.
6.
→ "Water outlet connection types",
Page 20
15
Advertisement
Table of Contents
