Levelling The Appliance; Turning On The Power - LG GB-B3442BE Owner's Manual

global_main.book.book Page 12 Wednesday, November 16, 2022 4:42 PM
INSTALLATION
12
*1
b Cord Holder
*1
Hinge Cover
c
*1
d Upper Hinge
*1
e Stopper
Reversing Doors
This feature is only available on some models.
Your appliance is designed with reversible doors,
so that they may open from either the left or right
hand side to suit your kitchen design.
NOTE
• Reversing the doors must be performed by the
qualified personnel of LG Electronics. If not, the
doors will not be covered by the warranty.
Inserting the Stoppers
Insert the stoppers to the upper edge on the rear
plate of the appliance. The stoppers are supplied
with the kit in the appliance.
NOTE
• Stoppers should be inserted to reduce the
electricity consumptionget in operation of the
appliance.

Levelling the Appliance

Adjusting the Levelling Leg
If the appliance seems unsteady, or the doors do
not close easily, adjust the appliance's tilt using the
instructions below.
1
Turn the levelling leg clockwise to raise that
side of the appliance or counterclockwise to
lower it.
2
Open the doors and check to make sure that
they close easily.
NOTE
• Leveling the doors may not be possible when the
floor is not leveled, or is of weak or poor
construction.
• The refrigerator is heavy and should be installed
on a rigid and solid surface.
• Some timber flooring may cause levelling
difficulties if it flexes excessively.

Turning on the Power

Connecting the Appliance
To turn on the appliance, connect the power plug
into the outlet socket. Do not double up with other
appliances on the same outlet.
NOTE
• After connecting the power supply cord (or plug)
to the outlet, wait 3 or 4 hours before you put
food into the appliance. If you add food before
the appliance has cooled completely, your food
may spoil.