LG GS-N635PL Owner's Manual page 41

2
Pull the pipe out from the water filter cap until
the colored line
a
3
Push the pipe into the water fitler cap, making
sure the end is fully sealed.
4
Tighten the screw cap until the colored line in
the water filter is no longer visible.
5
Press and hold the Water Filter button for
three seconds. That resets the Replacement
Filter icon. The new water filter has been
activated.
6
Dispense water for approximately 5 minutes to
remove trapped air and contaminants from the
system.
Push fit connector type
1
Remove the screw cap.
is visble.
*1
2
Pull the pipe out from the water fitler.
3
Push the pipe into the water fitler, making sure
the end is fully sealed.
4
Insert the screw cap until the colored line in the
water filter is no longer visible.
5
Press and hold the Water Filter button for
three seconds. That resets the Replacement
Filter icon. The new water filter has been
activated.
6
Dispense water for approximately 5 minutes to
remove trapped air and contaminants from the
system.
CAUTION
• Failure to replace filters when required or using
non LG authorised water filters can cause the
filter cartridge to leak and result in property
damage.
MAINTENANCE
41