Connecting The Aerial And External Devices - JVC AV-21D43 Instructions Manual

Preparation

3 Connecting the aerial and external devices

• For further details, refer to the manuals provided with the devices you are connecting.
• Connecting cables are not supplied.
• The front and rear AUDIO/VIDEO input jacks are directly connected so that input to either jack
is output through both. You cannot provide input to both the front and rear jacks at the same
time. Disconnect one input, or use one of the jacks as an output jack only (for monitoring or
recording).
• The rod aerial is supplied with the AV-14F43.
■ Connecting the aerial and VCR
Connecting the aerial
To install rod aerial:
Install into the top-rear aerial holder. Once installed, it cannot be removed.
VHF/UHF outdoor aerial
Connecting the aerial and VCR
4
VIDEO
VHF/UHF outdoor aerial
1
Indoor aerial
Rod aerial
AUDIO
IN
OUT
2
VIDEO
To video
To RF
output
output
To aerial input
• Illustration of AV-14F43.
AUDIO
IN
OUT
3
To audio
output
VCR
• Illustration of AV-14F43.