Table of Contents
Advertisement
Quick Links
DT105032AE
ORIGINAL OPERATING INSTRUCTIONS
CORDLESS DRILL DRIVER
Thank you for buying a DuraTech 20V cordless drill driver set. Your new cordless drill driver has been engineered and
manufactured to DuraTech's high standard for dependability, ease of operation, and operator safety. Properly cared
for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator's manual.
SAVE THIS MANUAL FOR FUTURE REFERENCE
Distributed by
Hangzhou GreatStar Industrial Co., Ltd.
No.35 Jiuhuan Road, Jiubao Town,
Hangzhou 310019, China
www.greatstartools.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Duratech DT105032AE
Summary of Contents for Duratech DT105032AE
- Page 1 ORIGINAL OPERATING INSTRUCTIONS CORDLESS DRILL DRIVER Thank you for buying a DuraTech 20V cordless drill driver set. Your new cordless drill driver has been engineered and manufactured to DuraTech's high standard for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
-
Page 2: Table Of Contents
TABLE OF CONTENTS Caution Environmental protection Disposal of an exhausted battery pack Description of symbols General safety rules Additional safety instructions Additional safety instructions for the charger Additional safety instructions related to the battery pack and battery safety When to charge the battery Know your product and specifications Operating instructions Problem solution... -
Page 3: Caution
Tool. Take special care to heed the Cautions and Warnings. Your DuraTech power tool has many features that will make your job faster and easier. Safety, performance, and dependability have given top priority in the development of this tool, making it easy to maintain and operate. -
Page 4: General Safety Rules
in the off-position before connecting to power GENERAL SAFETY RULES source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on WARNING:Read and understand all instructions. the switch or energising power tools that have the Failure to follow the warnings and instructions may switch on invites accidents. -
Page 5: Additional Safety Instructions For The Charger
Do not plug anything other than your DuraTech tool into the charger, as other objects may touch 5. Service dangerous voltage points or short out parts, which could result in fire or electric shock. -
Page 6: When To Charge The Battery
Charge the battery only with the DuraTech charger Do not use a leaking battery. supplied with the tool or DuraTech-approved Handle batteries with care to avoid shorting the replacements and according to the instructions in battery with conducting materials, such as nails, the DuraTech Instruction Manual. -
Page 7: Know Your Product And Specifications
KNOW YOUR PRODUCT SPECIFICATIONS Charger:.........220-240V~, 50-60Hz 1/2" (13mm)Keyless Chuck Battery:..............2.0Ah Torque Adjustment Ring Charging Time:..........Around 1H Two-speed Gear Control Drill No Load Speed:....... 0-400/0-1400 min Forward/Reverse Rotation Control Torque Settings: .............25+1 Belt Clip Torque: ..........350 In-lbs (40 N.m.) Battery Pack Drill Chuck Capacity: .....1/2"... -
Page 8: Operating Instructions
OPERATING INSTRUCTIONS Fig. A NOTE: Before using the tool, read the instruction book carefully. WARNING: This product can expose you to chemicals including lead which are known to the State of California to cause cancer and birth defects or other reproductive harm. - Page 9 Fig. D WARNING: Never change the direction of rotation when the chuck is rotating, wait until it has stopped! 4. Two-speed Gear Control (Fig. D) The drill has a two-speed gear control designed for drilling or driving at LOW (mark is 1) or HIGH (mark is 2) speeds.
-
Page 10: Problem Solution
PROBLEM SOLUTION Fig.H 1. Why Does The Drill Not Turn On When You Press The Switch? The forward/reverse rotation control, which is on top of the trigger, is positioned in the lock function. Unlock the forward/reverse rotation control by putting it into the required rotation position. -
Page 11: Maintenance
MAINTENANCE BATTERY CAPACITY INDICATOR Battery capacity indicator Clean the drill driver using a soft, damp cloth. Do Press the battery capacity indicator switch.The battery not use detergents or flam mable products which capacity indicator shows the charge status of the may damage the tool.
Need help?
Do you have a question about the DT105032AE and is the answer not in the manual?
Questions and answers