Base Unit - Panasonic KX-TG2740S Controls Layout

The 2 metal ridges at the bottom of the handset are the charge contacts.
The handset's Speakerphone Speaker is the circular textured area on the back of the handset.
The headset jack is on the left side of the handset, parallel to the TALK button. It has a rubber cover that can be
opened by pulling down, and is not removable.

Base unit

With the base unit facing you, the antennas on the left and right sides of the unit and they can be rotated around
their mounting posts so that they can be positioned pointing upwards whether the unit is on a desk or
wall-mounted. The handset's charging cradle is located on the lower left corner of the unit with an indicator light
to the lower right. This is about 2 inches wide and 1 inch deep. The handset is placed in the cradle with the
handset's buttons facing the front of the base. The unit will beep when the handset is properly placed in the
cradle for charging. The rectangular textured area, toward the back of the unit above the cradle is the speaker.
To the right of the speaker is a smooth rectangular depression. This is the display.
Below the display is a row of 4 thin buttons. The left-most one is the LINE 1 button with an indicator light just
above it. Immediately to the right is the LINE 2 button with an indicator light just above it. The third button from
the left is the HOLD button. The right-most is the CONFERENCE button.
Below these buttons is a row of 5 round buttons. The left-most is the ANSWER ON button with an indicator
light to the upper left. Immediately to the right is the MEMO button. To the right of the MEMO button, there are
3 other buttons. From left to right, they are MAILBOX 1, MAILBOX 2 and MAILBOX 3 buttons. When the
Answering System is on, these 3 buttons control Mailbox Features such as recording and playing back messages.
In the center below these buttons is the NAVIGATOR control, which is a large oval with an oval depression in
the center. This control has four active areas that are the 12 o'clock, 3 o'clock, 6 o'clock and 9 o'clock positions.
The 12 and 6 o'clock positions are the UP and DOWN keys respectively. These are also the volume control up
and down keys during a call. The 3 and 9 o'clock positions are the right and left arrow keys respectively. These
are used to enter the directory list. The 3 o'clock position is often used as "Yes" key during programming.
To the upper left of the NAVIGATOR control is the ERASE button, and to the upper right is the STOP button.
The STOP button is also the EXIT button. To the lower left of the NAVIGATOR control is the FUNCTION
button, and to the lower right is the EDIT button.
Moving toward the right part of the unit, on the front there are 4 buttons in a row. The left-most one is a larger
round DIGITAL SPEAKERPHONE button with an indicator light to the lower left. To the right of the DIGITAL
SPEAKERPHONE button is the MUTE button with an indicator light to the lower left. The third button from the
left is the FLASH button. The FLASH button is also the CALL WAIT button. The right-most is the REDIAL
button. The REDIAL button is also the PAUSE button.
Above these buttons is the telephone keypad laid out in the conventional telephone arrangement with a "nib" on