List Of Components; Before Use; After Use - Zephir ZHC10B Manual

ACCESSORIES:
*BAKE PAN
*BAKE RACK
*PAN HANDLE

LIST OF COMPONENTS

LIST OF COMPONENTS
1. Power light
2. Timer
3. Temperature selector
4. Glass door handle
5. Bake rack
6. Bake pan
7. Heating elements
8. Glass door clips
9. Pan handle
THERMOSTAT (Temperature Selector)
Turn the thermostat knob to select the desired cooking temperature
TIMER
Turn the timer knob to select desired cooking time.

BEFORE USE

Ensure that there is enough ventilation around the oven.
-
Ensure that the oven is completely dry before use.
-
The oven should not be placed on untreated wooden surface. Place the oven on a heat resistant surface.
-
The feet of the oven can leave some marks on the table, if this happens, remove the marks with a damp
-
cloth.
OVEN USE
Turn the thermostat dial clockwise to the desired temperature.
-
Turn the timer dial clockwise to the desired cooking time..
-
When the cooking time is over, the timer will auto shut off and the bell will ring.
-
If the cooking is finished earlier than the set cooking time, please turn back the timer to OFF to turn off
-
the oven.
In the first use of this oven, there might be some light smoke coming out from the oven, this is normal.
-
After 5-15 minutes the smoke will disappear.
In order to get better cooking performance, it is recommended to pre-heat the oven about 10-15 minutes.
-

AFTER USE

- Turn back the timer to OFF.
- Clean bake rack and bake pan with a damp cloth.
- Unplug the appliance from the outlet.
- Wait until the oven is completely cool before any cleaning or maintenance.