IBM ED-X10 User Manual page 28

PICTURE Menu
PICTURE Menu (continued)
Item
COLOR TEMP
COLOR
TINT
SHARPNESS
8
Using the buttons ▲/▼ switches the mode of color temperature.
HIGH DEFAULT � HIGH CUSTOM � MID DEFAULT � MID CUSTOM
LOW DEFAULT � LOW CUSTOM � Hi-BRIGHT-1 DEFAULT � Hi-BRIGHT-1 CUSTOM
Hi-BRIGHT-2 DEFAULT � Hi-BRIGHT-2 CUSTOM
To adjust CUSTOM
Selecting the CUSTOM and then pressing the
button ► or the ENTER button displays a dialog
to aid you in adjusting the OFFSET and/or GAIN
of the CUSTOM mode.
OFFSET adjustments change the color intensity
on the whole tones of the test pattern.
GAIN adjustments mainly affect color intensity
on the brighter tones of the test pattern.
Choose an item using the buttons ◄/►, and adjust the level using
the buttons ▲/▼.
You can display a test pattern for checking the effect of your
adjustment by pressing the ENTER button.
Each time you press the ENTER button, the pattern changes as
below.
No pattern ð Gray scale of 9 steps
Ramp  Gray scale of 5 steps
• When this function is performed, a certain extra such as a line
may appear.
Using the buttons ▲/▼ adjusts the strength of whole color.
Strong ó Weak
• This item can be selected only for a video signal, s-video or
component video signal.
Using the buttons ▲/▼ adjusts the tint.
Greenish ó Redish
• This item can be selected only for a video signal, s-video or
component video signal.
Using the buttons ▲/▼ adjusts the sharpness.
Strong ó Weak
• There may be some noise and/or the screen may flicker for a
moment when an adjustment is made. This is not a malfunction.
Description
ENTER :
OFFSET GAIN
R G B R G B
+0 +0 +0 +0 +0 +0
COLOR TEMP [CUSTOM-1]